Building in Kenya without the right team is expensive, stressful, and slow. Most projects fail not because of bad intentions but because of a fragmented process — one architect, one contractor, and a gap between them that the client is left to manage alone. Aalis Studios was founded to close that gap. We provide an integrated design and build service in Kenya that covers architecture, interior design, cost planning, approvals, construction management, and project handover under one coordinated team.
What Design & Build Means
What Is Design and Build in Kenya — and Why Does the Model Matter?
Design and build is a project delivery method where a single integrated team handles both the design and construction phases of your project under one contract. You commission one firm. One team is accountable from the first sketch to the day you receive your keys.
In the conventional approach — still the most common in Kenya — you hire an architect to produce drawings, then go separately to market for a contractor, then manage the relationship between them yourself. When the contractor builds something differently from what the architect intended, or when variations arise on site, the accountability gap creates cost overruns, delays, and disputes that fall entirely on the client.
The design and build model eliminates that gap. At Aalis Studios, the architect, interior designer, cost planner, and construction manager are part of the same coordinated team. This means design decisions are made with construction cost and buildability in mind from day one. There is no translation problem between design intent and construction execution. And if something goes wrong, there is one clear point of accountability: us.
"The client's job should be to make decisions about their home — not to manage coordination between professionals who have never worked together before. That is what design and build resolves."
Arch. Vincent Abuya — Principal Architect, Aalis Studios
Design-Build vs Traditional
Design & Build vs the Traditional Method: A Direct Comparison
Design & Build vs Traditional Architect + Separate Contractor — Kenya
| Factor |
Design & Build (Aalis Studios) |
Traditional Method |
| Accountability |
Single team, one contract |
Split between architect and contractor |
| Cost certainty |
BOQ aligned with design from start |
Contractor prices design produced separately |
| Design variations |
Managed within same team, costed immediately |
Requires separate architect instruction + contractor quotation |
| Timeline |
Design and construction can overlap where appropriate |
Sequential — design fully complete before contractor engaged |
| Interior design |
Integrated from concept — no separate appointment |
Usually a third separate appointment and contract |
| Client coordination burden |
One point of contact throughout |
Client manages multiple independent contracts |
| Diaspora / remote delivery |
Structured remote review and reporting built in |
Difficult to manage multiple parties remotely |
| Approvals management |
Architect manages county and NCA submissions |
Often unclear whose responsibility to follow up |
Ready to Start?
Tell us about your project.
We'll give you a clear next step.
Whether you have a plot, a brief, or just an idea — our initial consultation is designed to give you clarity on what is possible, what it costs, and how we work.
Our Service Scope
What Aalis Studios Includes in Our Design & Build Service
Design and build is not one service — it is a coordinated package. Here is exactly what our integrated scope covers from initial consultation through to handover.
01
Architectural Design
BORAQS-registered architectural drawings — concept through to detailed and county-submission-ready construction documents, stamped by our registered architect.
02
Interior Design
Space planning, material and finish specification, joinery design, lighting design, and fit-out coordination — delivered by our interior design team as part of the same project, not a separate appointment.
03
3D Visualisation
Photorealistic renders of key spaces so you can visualise and approve your home before any construction begins. Essential for remote and diaspora clients making decisions from abroad.
04
Structural & MEP Coordination
Coordination of structural engineer and MEP (mechanical, electrical, plumbing) consultants to produce fully coordinated construction documents. No gaps between disciplines.
05
Cost Planning & BOQ
Detailed Bill of Quantities itemising materials, labour, and specification. You see exactly what you are paying for and why. Value engineering to optimise cost without compromising the design.
06
Approvals Guidance
Management of county development permission submissions, guidance on NCA project registration, and advice on NEMA/EIA processes where applicable. We handle the compliance process so you do not have to.
07
Procurement & Contractor Management
Vetting and recommending NCA-registered contractors, managing tender processes, reviewing contractor rates against our BOQ, and overseeing procurement of key materials for cost and quality protection.
08
Construction Supervision & Site Reporting
Regular site visits, quality checks, and weekly written and photographic progress reports. Budget milestone approvals are required from you before expenditure is committed — you stay in control throughout.
09
Interior Fit-Out Coordination
Coordination of all interior installation works — flooring, joinery, sanitary ware, lighting, kitchen, and all specified finishes. The interior design is executed as part of the same managed delivery.
10
Snagging, Handover & As-Builts
Formal snagging inspection to identify and resolve all defects before handover. You receive as-built drawings, product warranties, and a maintenance guide. The project is not complete until you are satisfied.
📋
The exact scope included in your engagement is confirmed at the start of the project. Some clients engage Aalis Studios for the full end-to-end service; others engage us for specific phases such as design and cost planning, with construction managed separately. We are transparent about what each scope covers and what it costs. Ask us about your specific project.
Who This Service Is For
Who Should Choose Design & Build in Kenya?
The design and build model is not the right approach for every project — but it is the right approach for clients who value accountability, coordination, and a managed process over price alone. Here are the buyer types we work with most.
🏠
Homeowners Building in Kenya
You have a plot and a vision for your home. You want one team to take you from design through construction without you having to coordinate multiple independent professionals. Aalis Studios manages the process end to end.
✈️
Diaspora Clients Building Remotely
You are based in the UK, USA, Canada, Australia or the Gulf and want to build a home in Kenya without being on the ground. Our remote delivery model — with weekly reports, 3D approvals, and milestone-based payments — is built specifically for you.
🏢
Apartment & Property Investors
You own an apartment that needs a full interior fit-out, or a property you want to configure for Airbnb rental. Our interior design and build scope covers concept through installation — delivered on a clear timeline and budget.
🏬
Office, Retail & Commercial Clients
You need a new office, a retail space, a hospitality fit-out, or a commercial interior in Nairobi or Kenya. We design and deliver commercial spaces under the same integrated model — brief to handover, under one team.
🏗️
Developers Seeking Coordinated Delivery
You are developing a residential or mixed-use scheme and need coordinated architecture, interiors, and construction management without the complexity of managing multiple independent consultants and contractors.
🌿
Sustainability-Focused Clients
You want a home or building that is designed with climate response, natural ventilation, material efficiency, and long-term running cost in mind. Aalis Studios is EDGE-certified and integrates sustainable design principles at the architectural stage — not as an afterthought.
Step-by-Step Process
Our Design & Build Process: Brief to Handover
Clients who understand our process before they engage us make better decisions faster — and have better projects. Here is exactly how we deliver a design and build project in Kenya.
01
Initial Consultation & Project Brief
Week 1
We meet — in person or via video call for diaspora clients — to discuss your vision, site, timeline, and budget. We produce a written project brief confirming the scope, design intent, and next steps. No obligation to proceed beyond this stage.
02
Site Visit & Feasibility Assessment
Week 1–2
Our team visits the site to assess topography, orientation, access, services availability, and planning constraints. We produce a written feasibility report confirming what can be built, what approvals are required, and a realistic cost range for your project.
03
Budget Alignment & Concept Strategy
Week 2–3
Before any design work begins, we align the design ambition with your confirmed budget. We agree the project programme, the approval pathway, and the key design priorities. This prevents expensive redesign later and ensures the design we produce can actually be built within your means.
04
Architectural & Interior Design
Week 3–10
Our architects develop the concept design through schematic, design development, and detailed design stages — producing BORAQS-stamped drawings for county submission. Simultaneously, our interior designers develop material palettes, space planning, and finish specifications coordinated with the architecture.
05
3D Visualisation & Remote Client Review
Week 8–12
We produce photorealistic 3D renders of key spaces. For diaspora and remote clients, this is the primary tool for reviewing and approving the design. We hold structured video review sessions where you can request changes before anything is built.
06
Cost Planning, BOQ & Value Engineering
Week 10–14
We produce a detailed Bill of Quantities itemising materials, labour, and specifications against our design. We then value-engineer where appropriate — identifying where more affordable alternatives deliver the same result — before the contractor is engaged.
07
Statutory Approvals & Compliance
Week 12–22
We manage submission of BORAQS-stamped drawings to the relevant county council for development permission. We advise on NCA project registration and manage any applicable NEMA/EIA licensing process. County approvals in Kenya typically take 4–10 weeks.
08
Procurement, Contractor Vetting & Site Mobilisation
Week 20–24
We vet and recommend NCA-registered contractors with experience relevant to your project type. We manage the tender process, review contractor rates against the BOQ, and oversee contract execution. We also manage procurement of key materials to protect cost and quality.
09
Construction, Site Supervision & Weekly Reporting
Months 5–12+ (varies by project)
Our project manager and site supervisor oversee daily operations. You receive weekly written and photographic progress reports. Budget milestone approvals are required from you before significant expenditure is committed. You are in control at every stage — from wherever in the world you are.
10
Interior Fit-Out, Snagging & Handover
Final 4–8 weeks
We coordinate interior fit-out installation — flooring, joinery, sanitary ware, lighting, kitchen, and all specified finishes. We conduct a formal snagging inspection to identify and resolve defects. Handover includes as-built drawings, product warranties, and a maintenance guide.
Project Types
Homes, Apartments, Offices & Commercial Projects
Residential Design and Build Kenya
Our most established service area. We design and deliver private residential homes in Nairobi, Kiambu, Thika, Ruiru, Kitengela, Kajiado, Machakos, and across Kenya. Residential projects range from compact three-bedroom bungalows to contemporary four-bedroom maisonettes, luxury villas, and bespoke architect-designed homes. The integrated design and build model is especially valuable here — the architect, interior designer, and construction manager working as one team produces a coherent, well-executed home where the architecture and interiors feel like they belong together.
Apartment and Short-Let Interior Fit-Out
If you own an apartment that needs a complete interior transformation — or a property you want to configure as an Airbnb or furnished short-let — our interior design and build service delivers concept, material selection, procurement, and installation management under one coordinated team. Nairobi's short-let market rewards well-designed interiors with meaningfully higher occupancy rates and nightly rates. We design for both aesthetics and durability.
Office Design and Build Nairobi
For commercial clients requiring new or refurbished office space in Nairobi — Westlands, Upper Hill, Kilimani, Riverside, and across the city — we provide office design and fit-out services from brief through to handover. Our scope includes space planning, furniture specification, MEP coordination, branding integration, and construction management. We design offices that people actually want to work in.
Retail, Hospitality and Commercial Fit-Out
Restaurant design and build, retail concept fit-out, hotel room and public area refurbishment, and hospitality interior design — all delivered with the same integrated process. Commercial clients value our attention to detail and our ability to coordinate complex fit-out works while minimising disruption to operations.
Building from Abroad
Building in Kenya from Abroad: Our Diaspora Project Support
For Clients in the UK, USA, Canada, Australia & the Gulf
Your project is managed in Nairobi.
You stay informed from wherever you are.
Building in Kenya from abroad is one of the most common requests we receive — and one of the most poorly served by the conventional architect-then-contractor model. Aalis Studios has developed a remote delivery process specifically designed for diaspora clients who want to build a home or invest in property in Kenya without being on the ground.
3D Design Approvals
Photorealistic renders of every key space before construction begins. You approve from abroad with full visual clarity.
Video Review Sessions
Structured milestone review calls with your project manager and architect at every key decision point.
Weekly Site Reports
Written and photographic progress updates every week so you see exactly what is happening on your site.
Milestone Budget Approvals
You authorise expenditure at each construction milestone before it is committed. Full financial transparency.
Named Project Manager
One person on the ground who is your single contact throughout. Available by WhatsApp and email.
Approvals & Compliance Managed
County development permission, NCA registration, and any NEMA process — handled by our team in Nairobi.
We work with clients in the UK, USA, Canada, Australia, UAE, and across the diaspora. Many have built homes in Nairobi, Kiambu, Thika, and surrounding areas through our remote delivery model. The key to a successful diaspora build is not eliminating the distance — it is building a process robust enough to work across that distance without exposing you to risk.
Cost Guide 2026
Design & Build Cost in Kenya: What Affects Your Budget?
One of the most common mistakes clients make is approaching cost in Kenya with a single figure in mind without understanding the variables that drive it. Here is an honest guide to what affects the final budget of a design and build project in Kenya in 2026.
Standard Finish
Residential Build
KES 35K–50K
per square metre · 2026 estimate
- ✓ Ceramic tile floors
- ✓ Standard sanitary ware
- ✓ Painted walls
- ✓ Standard ironmongery
- ✓ Functional kitchen fittings
Most Common
Mid-Range Finish
Residential Build
KES 55K–80K
per square metre · 2026 estimate
- ✓ Porcelain or engineered floors
- ✓ Semi-premium sanitary ware
- ✓ Textured or feature walls
- ✓ Fitted wardrobes & joinery
- ✓ Kitchen with stone worktop
High-End / Luxury
Residential Build
KES 90K–150K+
per square metre · 2026 estimate
- ✓ Imported or specialty materials
- ✓ Designer sanitary ware
- ✓ Bespoke joinery throughout
- ✓ Smart home systems
- ✓ Premium kitchen & appliances
⚠️
These are construction cost estimates only. They exclude land, statutory fees (development permission, NCA registration, NEMA if applicable), external works (perimeter wall, gate, driveway, landscaping), furniture and loose fittings, and professional fees. Always request a detailed BOQ for your specific project.
What Factors Drive the Final Budget in Kenya?
Project Size
Cost per square metre tends to decrease as project size increases — fixed costs like site establishment, scaffolding, and equipment spread across more floor area. A 150m² house costs more per m² to build than a 350m² house of equivalent specification.
Location and Site Access
Construction in central Nairobi is typically benchmarked as the baseline. Sites in Thika, Ruiru, Kitengela, or Machakos add 5–12% for material transport and local labour variations. Remote or difficult-access sites add more.
Site Conditions and Topography
Steeply sloping sites require more extensive and expensive foundations. Rocky ground increases excavation cost. Sites with difficult access or shallow services connections add to preliminaries. A site visit is essential before any cost estimate is credible.
Finish Level and Material Specification
The single biggest driver of cost variation within a project of the same size and location is the finish specification. The difference between a standard-finish and high-end-finish home of 250m² can easily exceed KES 8–15 million.
Structural System
Conventional masonry construction remains the most cost-effective structural method for residential projects in Kenya. Light gauge steel (LGS) is faster but carries a cost premium of 10–20%. Timber frame adds aesthetic value in certain project types. The structural choice should be driven by project type, timeline, and site — not trend.
Procurement and Market Timing
Material prices in Kenya fluctuate with global supply chains, exchange rates, and seasonal construction demand peaks. Projects starting in January or August often face more competitive contractor pricing than those mobilising in peak periods. Our BOQ process locks in rates early and protects you from mid-project surprises.
Approvals & Compliance
Approvals, Compliance & Professional Accountability in Kenya
One of the most common sources of anxiety for clients building in Kenya — particularly those building from abroad — is the question of approvals and compliance. Who handles county permission? Who registers the project with NCA? When is a NEMA licence required? Here is a plain-English explanation of the main regulatory requirements for construction projects in Kenya, and how Aalis Studios manages them.
Architecture & QS Regulation
BORAQS
The Board of Registration of Architects and Quantity Surveyors regulates architectural practice in Kenya under the Architects and Quantity Surveyors Act (Cap. 525). All development applications to county councils must include drawings stamped by a BORAQS-registered architect. Aalis Studios is BORAQS-registered. Building without BORAQS-stamped drawings risks a stop-work order and demolition notice.
Contractor & Project Registration
NCA
The National Construction Authority regulates contractors and construction projects in Kenya. Contractors above a certain category threshold must be NCA-registered. Construction projects above a prescribed threshold must be formally registered with NCA before works commence. Aalis Studios is NCA-registered and works only with NCA-registered contractors on our construction projects.
Environmental Impact
NEMA / EIA
The National Environment Management Authority administers Environmental Impact Assessment licensing in Kenya. Not all projects require a NEMA EIA — the requirement depends on project type, scale, and location. Residential projects below threshold typically do not require a NEMA licence. Larger developments, projects near environmentally sensitive areas, and projects above prescribed floor areas may require full EIA. Aalis Studios advises on applicability at the outset of every project.
In addition to the above, all construction projects in Kenya require development permission from the relevant county government — submitted with BORAQS-stamped architectural drawings. In Nairobi, this is processed through the Nairobi City County physical planning department. In other counties, the process varies. Aalis Studios manages the submission, tracking, and follow-up of county development permission as part of our design and build service.
Why Choose Us
Why Clients Choose Aalis Studios for Design & Build in Kenya
Architecture + Interiors + Construction Management — Genuinely Integrated
Many firms call themselves design-build but separate their architecture and interior design into different teams or third parties. At Aalis Studios, architecture, interior design, and construction management are genuinely part of one coordinated team and one process — which produces better buildings and more coherent spaces.
Award-Winning Design at Every Level
Aalis Studios is the winner of the Lexus Design Award 2020 Grand Prix — an internationally recognised award for design excellence. Our approach is rooted in architecture that is contemporary, contextually appropriate, and designed to hold its value. We do not produce generic plans. Every project is specific to your site, your programme, and your life.
BORAQS, NCA and EDGE Credentials
All three certifications matter. BORAQS ensures our architectural drawings are legally valid for county submission. NCA registration means our contractors meet Kenya's regulatory standards. EDGE certification means our design process actively addresses energy, water, and material efficiency — reducing your long-term running costs and environmental impact.
Transparent Cost Process — No Surprises
We produce detailed Bills of Quantities before construction begins. You see exactly what you are paying for. We do not commit expenditure without your milestone approval. If the design needs to be value-engineered to fit your budget, we do that before the contractor is on site — not after.
Remote and Diaspora Delivery Expertise
We have developed and refined a structured remote delivery model specifically for diaspora and remote clients. Photorealistic 3D visualisation, weekly site reporting, video review milestones, and milestone-based budget approvals mean you can build a home in Kenya with confidence — from anywhere in the world.
Climate-Responsive, Sustainable Design
Our architecture is designed to perform in Kenya's climate — natural ventilation, passive solar design, material efficiency, and responsible specification are integral to our design process. EDGE certification is available for qualifying projects. We believe sustainable design and beautiful design are the same thing.
Selected Projects
Design & Build Projects by Aalis Studios
Our portfolio spans private residential homes, apartment fit-outs, commercial interiors, and specialist design projects across Nairobi and Kenya. Below are selected examples of the types of design and build projects our team delivers.
Residential
Contemporary Villa — Kiambu
4-bedroom luxury residential home. Full design and build scope: architecture, interiors, landscaping, and construction management. Delivered on time and within the agreed BOQ budget.
Residential
Modern Family Home — Thika Road Corridor
3-bedroom flat-roof contemporary home for a diaspora client based in the UK. Full remote delivery from brief through to handover. Weekly photographic reporting throughout construction.
Interior
Airbnb Apartment Fit-Out — Kilimani, Nairobi
Full interior design and fit-out of a 2-bedroom apartment for the short-let market. Concept, material specification, procurement, and installation management.
Commercial
Office Design & Build — Westlands, Nairobi
Open-plan office design and fit-out for a Nairobi-based services firm. Scope included space planning, bespoke joinery, MEP coordination, and construction management from brief to handover in 8 weeks.
Diaspora
Konza Mansion — Award Project
Custom residential design project featuring integrated architecture and interiors. Internationally recognised as part of the Aalis Studios portfolio that earned the Lexus Design Award Grand Prix.
Residential
Mushroom Villa — Nairobi
A bespoke residential design that exemplifies the Aalis Studios approach to nature-inspired, contextually grounded architecture. Architecture, interior design, and project delivery.
Diaspora Clients
Building in Kenya from the UK, USA or Canada?
We manage every stage on your behalf.
Our diaspora design and build service includes weekly site reports, photorealistic 3D approvals, milestone-based payments, and a named project manager in Nairobi.
Frequently Asked Questions
Frequently Asked Questions About Design & Build in Kenya
What is design and build in Kenya? +
Design and build in Kenya is a project delivery model where one integrated team — combining architects, interior designers, cost consultants, and construction managers — handles your project from initial concept through to handover under a single contract. Instead of separately hiring an architect, then finding a contractor, then coordinating between them yourself, you engage one accountable firm. In Kenya, the design-build model is particularly suited to residential projects, apartment fit-outs, and commercial spaces where clients want predictable costs, a managed timeline, and a single point of responsibility.
How does design and build differ from hiring an architect and contractor separately? +
In the traditional method, you hire a BORAQS-registered architect to produce drawings, then go to market for a contractor, then manage the relationship between both parties yourself throughout the build. This creates coordination gaps, conflicting advice, and unclear accountability when things go wrong. In the design-build model, the architect, interior designer, cost planner, and construction manager are all part of one team — meaning design decisions, cost planning, and construction are aligned from day one. You have one contact, one contract, one team accountable for the outcome.
Is design and build cheaper or faster than the traditional method in Kenya? +
Design and build is not always cheaper per square metre, but it typically costs less in total project terms. The integrated team can value-engineer design decisions before construction begins — eliminating the expensive variations that arise when a contractor builds something they did not design. Kenyan construction projects frequently see cost overruns of 20–40% versus the original estimate; design and build reduces this exposure. On timeline, design and build is typically faster because design and construction planning are overlapped, and there is no procurement gap between the architect completing drawings and the contractor being engaged.
What does Aalis Studios include in its design and build service? +
Aalis Studios' design and build scope covers: BORAQS-registered architectural design, interior design and material specification, 3D photorealistic visualisation, structural and MEP coordination, Bill of Quantities preparation, cost planning and value engineering, county development permission management, NCA project registration guidance, NEMA/EIA advice where required, procurement planning, contractor vetting and management, construction site supervision, weekly written and photo progress reports, interior fit-out coordination, snagging and defects resolution, and formal project handover with as-built documentation.
Can Aalis Studios help diaspora clients build in Kenya remotely? +
Yes. Aalis Studios has a structured process specifically designed for diaspora and remote clients. Our remote delivery includes photorealistic 3D visualisation for every design stage, structured video review sessions at key milestones, weekly written site reports with photographs, milestone-based budget approvals, and a named project manager as your single contact. Many of our clients in the UK, USA, Canada, and UAE have built homes in Nairobi, Kiambu, Thika, and across Kenya this way.
Learn more about our diaspora build service.
How are county approvals and NEMA handled in a design and build project? +
All new development in Kenya requires development permission from the relevant county council, submitted with drawings stamped by a BORAQS-registered architect. Projects must also be registered with the National Construction Authority (NCA). Certain projects require a NEMA Environmental Impact Assessment licence — this depends on project scale, type, and location. Aalis Studios manages the entire approvals process: our architects produce county-submission-ready drawings, we guide NCA registration, and we advise on whether NEMA applies to your project. Approvals typically take 4–10 weeks depending on the county.
How much does design and build cost in Kenya in 2026? +
Construction costs in Kenya in 2026 range broadly by finish level: standard residential construction runs KES 35,000–50,000 per square metre; mid-range finishes from KES 55,000–80,000 per square metre; and high-end or luxury construction from KES 90,000–150,000+ per square metre. These are construction cost estimates — they exclude land, statutory fees, external works, furniture, and professional fees. Always request a detailed BOQ for your specific project. Aalis Studios provides cost planning and BOQ as part of our design and build engagement.
How long does a design and build project take in Kenya? +
Project timelines vary by size and complexity. A typical 3-bedroom residential house takes 3–4 months for design and approvals, then 6–10 months for construction — giving a total of 9–14 months from first consultation to handover. An apartment interior fit-out typically runs 4–8 weeks for design and 6–12 weeks for installation. A commercial office fit-out in Nairobi runs approximately 6–10 weeks from brief to handover. Aalis Studios prepares a project programme at the start of every engagement so you have a realistic, milestone-based timeline from day one.
Do I need a BORAQS architect for my project in Kenya? +
Yes. Under Kenya's Architects and Quantity Surveyors Act (Cap. 525), all development applications submitted to county councils must include drawings stamped by a BORAQS-registered architect. Building without approved plans risks a stop-work order and demolition notice from the county government. Aalis Studios is BORAQS-registered. Our architectural drawings are county-submission ready and properly stamped.
What areas in Kenya does Aalis Studios serve? +
Aalis Studios is based in Nairobi and primarily serves projects in Nairobi County, Kiambu County (including Thika, Ruiru, Kiambu town, and Kikuyu), Kajiado County (including Kitengela and Ongata Rongai), Machakos County (including Syokimau, Mlolongo, and Machakos town), and select projects in Mombasa, Nakuru, and other Kenyan towns. For diaspora clients, we can manage projects remotely across all of Kenya. Contact us to discuss your specific location.
What types of projects does Aalis Studios handle? +
Aalis Studios handles private residential homes (new build and extensions), apartment interior fit-outs, Airbnb and short-let property fit-outs, office design and build in Nairobi, retail and restaurant fit-outs, hospitality interior design, and residential estate development. Our strongest positioning is mid-to-high-end residential — including luxury homes, contemporary architecture, and bespoke one-off designs — combined with integrated interior design as part of the same project team.
What is the first step to start a design and build project with Aalis Studios? +
Contact us by phone, WhatsApp (+254 757 743 454), or email (hello@aalisstudios.com) to arrange an initial consultation. We discuss your project vision, site, timeline, and preliminary budget — with no obligation to proceed. For diaspora clients, this is conducted via video call. We then produce a written project brief confirming the scope and next steps.
Book a consultation here.
VA
Arch. Vincent Abuya
BORAQS Registered
EDGE Expert
Lexus Design Award 2020
Principal Architect
Vincent Abuya is the principal architect and founder of Aalis Studios, a Nairobi-based architecture, interiors, and construction management firm. With 15+ years of experience delivering projects across Kenya — including award-winning residential design, integrated interior fit-out, and remote diaspora builds — Vincent leads a team that combines design excellence with practical construction delivery. Aalis Studios is BORAQS-registered, NCA-registered, and EDGE-certified for sustainable design.
Start Your Project
Ready to Build in Kenya with One Accountable Team?
Whether you have a plot, a brief, an existing design, or just an idea — our initial consultation will give you clarity on what is possible, what it costs, and how we work. No obligation. No jargon.